1. When replacing the toilet cover, it is only necessary to remove the fixed anchor bolts after the toilet, and then the replacement can be carried out, and the actual operation can be reversed during installation. Most toilet covers are not sized, just adjust 2 anchor bolts during installation. However, it also requires good specifications, screw hole spacing, total width and length of the toilet cover, and then purchase a new toilet cover for replacement!
2. Find the screw pad, remove it with a live mover, and replace it with a new one. Generally, the parts of the screw pads are not easy to find, some are in the dark, and some are in the dark. On the screw pad in the dark, on the side of the toilet by the tank, open the lid. Reach in with your hand and touch it up and toward the water tank. You should be able to touch it, but you can’t see it.
3. Different styles of toilet covers are installed differently. Under normal circumstances, the bottom of the toilet cover is connected to the toilet and the back part is screwed with screws. If you reach down to find the screws on both sides, unscrew them. You can take out all the outer covers, it’s very simple, you guys might as well try it at home.
